| ASTM Specification |
ASTM A240 / ASME SA240 |
| Standard |
MSRR, AMS, BS, ASTM A240 / ASME SA240 |
| Length& Sizes Duplex 2507 board |
1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36″ X 120″ or 48″ X 144″, 4′ x 8′, Cut to size available |
| Thickness |
0.1mm to 100 mm Thk |
| Width |
10-2500mm |
| Hardness Duplex 2507 board |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Temper |
Annealed |
| Condition |
Polished on both sides |
| Finish Duplex 2507 board |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Stock in form of Duplex 2507 board |
Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
| Value Added Service |
Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of |
ATI, POSCO, JISCO, TISCO, LISCO, BAOSTEELESSAR, JINDAL, BHUSHAN, IMPORTED material |
| Test Report Duplex 2507 board |
Raw Materials Certificate |
| EN 10204/3.1B |
| 100% Radiography Test Report |
| High special strength, high melt point |
| Third Party Inspection Report, etc |
| Excellent corrosive resistance, good thermal resistance |
| Customer support after-sales service |
| Strict Control from Raw Material to Finished |
| Profiling Duplex 2507 board |
To provide a full profiling service we use numerous profiling methods including: |
| Plasma Plate Cutting |
| Laser Plate Cutting |
| Oxy-propane Flame Cutting |
| Specialized in Duplex 2507 board |
material under 3/16 " [5.00 mm] in thickness and 24″ [600 mm] and over in width |
| material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width |
| cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width |
| Free Quote, Inquiry answered within 24 hours |
| We offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Your message must be between 20-3,000 characters!
