High Strength Shipping Steel Plate Material EQ70 ABS 12600 x 3000 x 70mm With 3.2 Cert

A new variety of steel plates for marine engineering: S460G2+QT steel plates with two specifications of 50mm/100mm thickness have been successfully trial produced for offshore platforms. The production process of EQ43-EQ51 and WDB620E has been confirmed and optimized. 177.8mm, 185mm, and 215mm thick A517GrQ steel plates have been trial produced, certified by ABS classification society. S355G10+N trial production has been completed, and the test results of steel plates with different thickness specifications of 25-110 are good, and all performance indicators can fully meet the standard requirements, We have successfully developed the NVE690 steel plate for marine engineering ships and put it into mass production.
Steel plates for marine engineering
Series of steel grades certified by ABS classification society:
A-level: AQ56, AQ63, AQ70
D-level: DQ56, DQ63, DQ70
E-level: E36-Z35, E40 (≤ 100mm), EQ56, EQ63, EQ70
Class F: F40 (≤ 50mm)
Series of steel grades certified by DNV classification society:
NVD550, NVD620, NVD690, NVE420, NVE460, NVE500
A-level: NVA420, NVA460, NVA500, NVA550, NVA620, NVA690
D-level: NVD420, NVD460, NVD500, NVD550, NVD620, NVD690
E-Class: NVE420, NVE460, NVE500, NVE550, NVE620, NVE690
Series of steel grades certified by CCS classification society:
Grade A: A420, A460, A500, A550, A620, A690
D-level: D420, D460, D500, D550, D620, D690
E-level: E420, E460, E500, E550, E620, E690
Series of steel grades certified by ASTM classification society:
A514GrQ, A517GrQ certified thickness specification 215mm
NVD550, NVD620, NVD690, NVE420, NVE460, NVE500
Comparison between foreign and domestic standards for offshore platforms:
Chinese standard number GB712, commonly used grades B, D, D36, E36, E36 Z35, D40, F40, etc
American standard number ASTM A131/A131M, commonly used grades B, CS, etc. correspond to national standard 712
American standard number ASTM A537/A537M, commonly used grades 1, 2, 3, etc
The American standard number ASTM A36/A36M, commonly used grades A36, etc. correspond to the national standard T700American standard ASTM A572/A572M, commonly used grades A572Gr42, A572Gr50/60, etc. correspond to national standard T1591
American standard ASTM A633/A633M, commonly used grades A633B, A633D, etc. correspond to national standard T1591
British Standard No. BS 7191:1989 Commonly used grades 355D, 355EM, 450EMZ, etc. correspond to National Standard 6270
Japanese standard number JIS G 3106 commonly used grades SM490B, SM490C, etc
Japanese standard number JIS G 3115, commonly used grades SPV 355, etc. correspond to national standard 6654
NVD550, NVD620, NVD690, NVE420, NVE460, NVE500
Steel plates S460G2+QT, EQ43, EQ51, EQ56, EQ63, EQ70, A514GrQ, A517GrQ, S355G10+N are used for offshore platforms.
DNV certified ocean engineering steel plates NVE420, NVE460, NVE500, NVE550, NVE620, NVE690.
E-grade marine engineering steel plates require a low impact strength of 40 degrees and a yield strength of 690MPA or above. Completed certification from three classification societies, ABS, DNV, and CCS, for use on offshore drilling platform racks, drilling platform cantilevers, and offshore wind turbine installation ships.
The rolled plate has a thickness of 8mm to 700mm, a width of 1500mm to 4020mm, and a length of 3000mm to 27000mm. According to performance and user needs, steel plates can be hot-rolled in AR, controlled rolling CR, thermomechanical control process TMCP, normalized N, quenched Q, tempered T, quenched and tempered QT, normalized and tempered, quenched and tempered, and other states.
The ship plate has been certified by nine classification societies, including ABS in the United States, BV in France, LR in the United Kingdom, GL in Germany, DNV in Norway, RINA in Italy, NK in Japan, CCS in China, and KR in South Korea. It can produce Z-direction performance steel plates of various grades such as Z15-Z35.

Q: What is your terms of payment?
A: 30% TT in advance and balance paid before loading.

Q: Could you provide sample?
A: Yes, we are honored to offer you samples for quality check.

Q: How is the quality of your products?
A: Our products are manufactured strictly according to national and international standard, and we take a test before delivered out. If you want see our quality certifications and all kinds of testing report, please just ask us for it.

Q: How long does it take for samples and mass production?
A: Usually it will take3-5 days for ready molds, 15-20days for new molds and samples after confirmation, 25-30 days for mass production.