| Standards |
Designation |
| ASTM |
A 276 |
| Length |
Diameter |
| 2-12m |
6mm-500mm |
| Type |
Certification |
| 440A Stainless Steel Round Bar |
ISO 9001:2008 |
|
Grade
|
Why it might be chosen instead of 440C |
| 440A/B |
Slightly softer and more corrosion resistant grade needed |
| 440F |
High machinability required, with same hardness and hardenability as 440C |
| 420 |
Lower strength and hardness needed than any of the 440 grades |
| 416 |
Higher machinability required, and the much lower hardness and strength is still adequate |
Below you will find a brief overview of a number of stainless steel bar specifications. If you do not see a specification listed, please contact us.
| BS |
JIS |
IS |
DIN |
ASTM |
|
| Semi Free Cutting Steel |
15AM/8M |
SMn433H,SUM 41 |
13S25/
40C10S
18/40Mn15S12
|
— |
1137,1140 |
| Free Cutting Steel |
EN-1A
EN-1A L |
SUM-23
SUM-24 L |
11C10S25
—— |
9SMn30
9SMnPb30/
11SMnPb30
|
1212/
1213
12L14/
12L15
|
Stainless Steel Bar Specifications
|
ASTM A276
|
This specification encompasses cold-finished or hot-finished bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. |
ASTM A479
|
This specification includes cold and hot finished stainless steel bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels. |
ASTM A484
|
This specification includes wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions. |
ASTM A582
|
This specification includes cold or hot finished bars, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels. |
ASTM B473
|
This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition. |
Our Grades :
AISI:
201, 202, 301, 302, 303, 304, 304H, 304L, 316, 316H, 316L, 309, 309S, 310, 310S, 316Ti, 317, 317L, 347, 321, 321H, 410, 416, 420, 430, 430F, 431, 440C, 630, 17-4PH, F51
DIN:
WNR1.4301, WNR1.4305, WNR1.4306, WNR1.4307, WNR1.4401, WNR1.4404, WNR1.4571, WNR1.4541, WNR1.4828, WNR1.4841, WNR1.4845, WNR1.4449, WNR1.4438, WNR1.4310, WNR1.4550, WNR1.4541, WNR1.4878, WNR1.4006, WNR1.4005, WNR1.4021, WNR1.4028, WNR1.4016, WNR1.4104, WNR1.4105, WNR1.4057, WNR1.4542, WNR1.4462
Your message must be between 20-3,000 characters!
