|
Product Details:
|
| OD: | 6-500mm | Surface: | Black And Bright |
|---|---|---|---|
| Length: | 3-12m | Condition: | Heat Treatment |
| Type: | Hot Rolled | ||
| High Light: | 500mm Steel Round Bar,En 10278 Steel Round Bar,Bright Bearing Din Steel Round Bar |
||
16MnCr5 Steel Round Bar Hot Rolled Alloy Bar EN10084 DIN 1.7131 Special Alloy Rod
| Grade : | 16MnCr5 | ||||
| Number: | 1.7131 | ||||
| Classification: | Alloy special steel | ||||
| Standard: |
|
||||
| Equivalent grades: | Go here |
Chemical composition % of steel 16MnCr5 (1.7131): EN 10084-2008
| Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat. Steels with improved machinability as a result of the addition of lead or higher sulfur contents, depending on the manufacturing process up to around 0.1 % S, may be supplied on request. In this case, the upper limit of the manganese content may be increased by 0.15 % |
| C | Si | Mn | P | S | Cr |
| 0.14 - 0.19 | max 0.4 | 1 - 1.3 | max 0.025 | max 0.035 | 0.8 - 1.1 |
Mechanical properties of steel 16MnCr5 (1.7131)
| Nominal thickness (mm): | to 16 |
| Rm - Tensile strength (MPa) hardening and tempering at 200 | 1000 |
| Rm - Tensile strength (MPa) (+A) | 550 |
| Rp0.2 0.2% proof strength (MPa) (+A) | 420 |
| A - Min. elongation Lo = 80 mm (%) (+A) | 21 |
| Z - Reduction in cross section on fracture (%) | 62-64 |
| Brinell hardness (HBW): (+A) | 207 |
| Brinell hardness (HBW): (+TH) | 156 - 207 |
| Brinell hardness (HBW): (+FP) | 140 - 187 |
| Brinell hardness (HBW): (+N) | 138 - 187 |
| Rockwell B hardness ( HRB or RB): (+A) | 84 |
| Vickers hardness ( HV): (+A) | 170 |
Properties of steel 16MnCr5 (1.7131)
| Weldability: It is a MnCr alloy steel, easily hot machinable and weldable Hardenability: It has a low hardenability and therefore it can show good core features till thicknesses of about 20 mm. |
Equivalent grades of steel 16MnCr5 (1.7131)
Warning! Only for reference
| EU EN |
USA - |
Germany DIN,WNr |
France AFNOR |
England BS |
Italy UNI |
Spain UNE |
China GB |
Sweden SS |
Poland PN |
Czechia CSN |
Russia GOST |
Inter ISO |
|||||||||||||||
| 16MnCr5 |
|
|
|
|
|
|
|
|
|
|
|
|
NEW opportunities for buyers!
Post free buying requirement of steel 16MnCr5 (1.7131)
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
Heat treatment conditions
|
|
|
Alloy special steel |
Contact Person: Mr. Gao Ben
Tel: +86-18068357371
Fax: 86-0510-88680060
