|Width:||10-2000mm||Hardness:||Full Hard 1/2H 3/4H|
stainless steel coil stock,
cold rolled stainless steel coil
AISI 301 Stainless Steel Strip Full Hard DIN1.4310 Strip in Coil 1.25mm*1400mmT.S 900Mpa Min
ASTM A240 for annealed condition
ASTM A666 for tempered material*
Pots, Pans, Flatware, Counters, Sinks, Appliance components
Trim, Moldings, Wiper parts, Fastener parts
Dishwashers, Ovens, Refrigerators
Hinges, Doors, Frames, Roll formed sections, Spring clips, Clamps
Various equipment including conveyor belts
Aircraft, Trailer bodies, Rapid transit cars, Cargo containers
|Composition per ASTM A240|
|Chromium||16.00 – 18.00|
|Nickel||6.00 – 8.00|
|Mechanical Properties (Annealed, Per ASTM A240)|
|UTS||75,000 ksi Min|
|Elongation % in 2″||40.00 Min|
|Rockwell Hardness||RB95.00 Max|
* Tempered mechanical properties are available upon request.
301 stainless steel flat rolled coil is non-magnetic in the annealed condition but becomes magnetic when cold worked.
Type 301 is used in fabrication by bending, roll forming, blanking, stretch bending and drawing. It’s high work hardening rate helps minimize wall thinning when deformed. Deep drawing may require intermediate annealing or higher nickel content.
Contact Person: Gao Ben