SUS301L Stainless Stell Sheets & Strip TISCO 301L Stainless Steel 0.4 - 2.5mm with 4ft width
301 stainless steel sheets
0.3 - 3.0mm
5 - 1219mm
2438mm or customs as request
2B (PVC film)
1/4H 1/2H 3/4H FH Soft
BAOSTEEL POSCO BAOXIN JISCO TISCO
201 301 304 304L 309S 310S 316L 321 310S 410 420 430.etc
Type 301 stainless steel is a commonly used Austenitic stainless with higher strain-hardening. It offers good corrosion resistance, high strength, and elevated carbon to allow for cold working to a variety of tempers. It can be obtained in the 1/4 hard, 1/2 hard, fully hard and extra hard tempers. It retains sufficient ductility under 1/2 hardening conditions to be formed by rolling or bending into aircraft parts, structural parts of buildings, and especially railway carriage parts. Cold rolled slabs hardened by 3/4 to full hardening should be used for parts requiring high wear resistance and elasticity. Type 301L is the low carbon version of the 301 stainless steel, The typical application of 301 and 301L including gaskets, springs, shims, fasteners, tools, blades, automotive parts, aerospace components, kitchen utensils and Tableware, electrical components and others.
Grade 301 is a cheaper alternative to the traditional high-nickel austenitic stainless steels such as grade 304. Grade 301L stainless steel is a low carbon steel which is ideal for improved ductility and when heavy sections are to be welded. Unlike welds in grade 301, grade 301L does not need to be annealed for maximum corrosion resistance.
The following datasheet provides an overview of grade 301L stainless steel.
The chemical composition of grade 301L stainless steel is outlined in the following table.
The mechanical properties of grade 301L stainless steel are displayed in the following table.
Tensile Strength, Mpa (min.)
Yield Strength 0.2%
Elongation -% in 50 mm (min.)
301 1/4 Tempe
301 1/2 Tempe
301 Full Hard
Equivalent materials to grade 301L stainless steel are JIS SUS301L and ASME SA240.
Grade 301L stainless steel is widely used pressure vessels and for general applications.